eRTOS provides USB capabilities through a USB Host Stack, which can be optionally loaded when the eRTOS system boots.
Note: If the eRTOS USB is not enabled, you will not be able to use the eRTOS Console.
You can configure eRTOS USB through the RtConfig.rtreg file under Section Path [HKEY_LOCAL_MACHINE\SOFTWARE\INTERVALZERO\eRTOS\RtUSB]
| Setting | Type | Default value | Description |
|---|---|---|---|
|
IdealProcessor |
DWORD |
0 |
DWORD Sets the processor on which the USB Stack will run. |
Related Topics:
