RTFW_IPV4_CONFIGURATION Structure

RTFW_IPV4_CONFIGURATION represents an IPv4 address, and a corresponding network mask used to configure network interfaces.

Syntax

typedef struct _RTFW_IPV4_CONFIGURATION(
    TCHAR IPv4Address[RTFW_IPV4ADDRESS_LENGTH];
    TCHAR Netmask[RTFW_IPV4ADDRESS_LENGTH];
} RTFW_IPV4_CONFIGURATION, * PRTFW_IPV4_CONFIGURATION;

Members

IPv4Address

Holds an IPv4 address in dotted-quad notation.

Netmask

Holds a network mask in dotted-quad notation.

Remarks

The IPv4Address and Netmask strings must adhere to some specific rules to be considered valid and accepted:

• Both the IPv4Address and Netmask must match the A.B.C.D pattern, where A, B, C, and D are decimal numbers comprised between 0 and 255 inclusive
  • Examples violating this rule: 10.0.8.5.9, 192.168.3, 10.300.2.3
• The leftmost number of the IPv4Address (A) must be comprised between 1 and 223 inclusive and must not be equal to 127
  • Examples violating this rule: 0.1.2.3, 127.0.0.1, 224.0.0.1
• The binary representation of the Netmask must be a series of 1's followed by a series of 0's
  • Examples violating this rule: 192.168.100.50, 255.254.255.0
• The binary representation of the Network ID must not be all 0's
  • Example of an (IPv4Address, Netmask) pair violating this rule: (10.1.2.3, 240.0.0.0)
• If the Netmask is not equal to 255.255.255.255, then the binary representation of the Host ID must be neither all 0's nor all 1's
  • Examples of (IPv4Address, Netmask) pairs violating this rule: (192.168.100.0, 255.255.255.0), (192.168.100.255, 255.255.255.0)
• The binary representation of an IPv4Address or a Netmask whose dotted-quad notation is A.B.C.D, is a 32-bit number equal to (A<<24) | (B<<16) | (C<<8) | D
  • Example: the binary representation of 192.168.0.1 is 0b11000000101010000110010000110010 (or 0xC0A86432)
  • Example: the binary representation of 255.255.255.0 is 0b11111111111111111111111100000000 (or 0xFFFFFF00)
• The Network ID is the result of the bitwise AND operation between the IPv4Address and the Netmask; the Network ID is coded on 32 bits and it must be accompanied by the Netmask to be interpreted correctly
  • Example: if the IPv4Address is 192.168.100.50 and the Netmask is 255.255.255.0, then the Network ID is 192.168.100.0
• The Host ID is the result of the bitwise AND operation between the IPv4Address and the bitwise invert of the Netmask; the Host ID is coded on 32-N bits, where N is the count of 1's in the Netmask
  • Example: if the IPv4Address is 192.168.100.50 and the Netmask is 255.255.255.0, then the Host ID is coded on 8 bits and is equal to 50

Requirements

See Also:

• RTFW_NL2_INTERFACE
• RTFW_TCPIP_INTERFACE
• RtfwNL2CreateInterface